PURE® Mineral Béton - PMB
Are you looking for a new solution in home decoration? The PURE ® Minéral Béton – PMB – Cement and Lime for a mineral finish.
A concrete coating enriched in lime
Our PURE® Mineral Beton is a concrete coating enriched in lime.
It allows the realization of interior decorations in polished concrete, vertically as well as horizontally (walls, wash-basins, technical parts, etc.)
Its strength properties are combined with a decorative nuance finish in a color chart of softened shades. Its soft texture facilitates its application on most of surfaces
Decorative coating made from cement, lime and mineral fillers.
Slightly nuanced, color chart with softened shades.
Thin grain. A soft and smooth texture and a longer application time facilitate the application.
Indoor : wall, Italian shower, countertop, wash-basins, bathroom.
- Apply in 2 or 3 layers on the surface after preparation (plaster, old tiles, cellular concrete, cement, wooden derivatives…).
- Can be used either on new or old surfaces.
- Apply on a thickness from 1mm (decorative wall) to 2mm (technical room).
- Mix components powder and liquid (binder + water) in the good proportions indicated and knead.
- In case of a 2mm application, a primer coat is necessary.
- Finishing layers:
- Apply with a trowel, smoothly and regularly. Then allow drying. Scrub and sand the surface if necessary.
- Moisten lightly before the application of the last finish coat.
- Apply by trying to close the grain and the surface.
- Protection: several days later apply an adapted sealing system